Start by doing a left hand forward side saw, holding the handsticks in the middle. Do a side to side saw transfer into a right hand reverse side saw. Immediately after the switch, the devilstick should be doing a reverse rollover on the right handstick. At this point, raise your left hand up to about shoulder height and point the back side of the handstick away from you. The front end of the left handstick will be pointing toward you. Now from the reverse rollover on the right handstick, raise the devilstick and roll it up onto the back side of the left handstick. Let the devilstick rollover the back side of the left handstick and raise the right handstick so that the back side points away from you, like the left handstick. After the rollover on the left handstick, have the devilstick do a rollover on the back side of the right handstick (this is all about shoulder height). As you are passing the devilstick from the back side of the left handstick to the right handstick, the devilstick will be moving from your left side to your right side. Then from the rollover on the back side of the right handstick, bring the left handstick down for a rollover on the front side. You should now be back in the position of the left hand forward side saw.